12.01.2021

Rigs Of Rods Thomas C2

98
This was designed to be a 2nd Generation C2 with an MBE900 under the hood.
  1. Rigs Of Rods School Bus Pack
  2. Rigs Of Rods Thomas C2
  3. Rigs Of Rods C2 Download
  4. Rigs Of Rods Bus Mods
  5. Rigs Of Rods Thomas C2 Mods Download
  6. Bluebird All American Mod Rigs Of Rods
  7. Rigs Of Rods Thomas C2 Download 0.4

Download Rigs of Rods for free. A 3D simulator game where you can drive, fly, and sail. Rigs of Rods is a 3D simulator game where you can drive, fly and sail various vehicles using an accurate and unique soft-body physics engine.

This bus comes standard with a push-button shifter, 6-speed transmission, air door, dual stop arms, air brakes, and of course a crossing guard.
  • Rigs of Rods Mods. Search this site. School Bus Mods. Home‎ ‎ School Bus Mods.
  • Welcome to the Rigs of Rods Repository! Here you can find vehicles, terrains, tools and more to enhance your Rigs of Rods experience. For help installing mods, see the General FAQ. More content may be found on the Repository and Forum archives. Something missing?
  • Main development repository for Rigs of Rods soft-body physics simulator - RigsOfRods/rigs-of-rods.

Options on this bus include:
  • 3 types of 8-way lighting (Incandescent, LED, and LED with upgraded stop arms)
  • 5 unique body types (normal, handy, w/ side emergency door, shorty, and activity)
  • And some other goodies like an 4x4 version!

Controls:
Lights:
  • Ctrl+1- Ambers
  • Ctrl+2- Reds
  • Ctrl+3- Manual strobe activation
  • Ctrl+4- Dome lights
  • Ctrl+6- Marker/perimeter lighting
Commands:
  • F1/F2- Stop Arms, Crossing Guard
  • F3/F4- Air Doors
  • F5- Roof Hatches
  • F6- Driver Window
  • F7/F8- Rear Emergency Door
  • F9/F10- Wheelchair Lift Door or Side Emergency Door (if equipped)
  • F12- Wipers
Credits:
  • Main author: graysonk95
  • Original free-to-use with credit n/b: Brickman & Dereksh97
  • Rim meshes: Carsonj493
  • A few textures: 1999BluebirdFS65
  • Insults and encouragement: cveilleux, Cbp123, khadner, GoodAndPlenty, sirendude2011, matt815, 09ICCE200, Voulk, saftlinerc2, & ksh4489.
Options key:
(These letters in the file name indicate the following options)
  • L- LED 8-ways
  • I- Incandescent 8-ways
  • U- Alternate upgraded LED stop arms and Driver Alert Device
  • M- Videocamera mirrors
  • H- Normal length bus with wheelchair lift door
  • S- Short bus with wheelchair lift door
  • E- Normal length bus with side emergency door
  • A- Activity bus paint scheme
  • 4- Activity bus w/ suspension lift and 4-wheel drive

Body Type 8-Way Type Mirrors File Name (95_C2_*.truck)
Normal Incandescent Y IM.truck
Incandescent N I.truck
LED Y LM.truck
LED N L.truck
Upgraded LED Y LMU.truck
Upgraded LED N LU.truck
Side E-Door Incandescent Y IME.truck
Incandescent N IE.truck
LED Y LME.truck
LED N LE.truck
Upgraded LED Y LMUE.truck
Upgraded LED N LUE.truck
Handy Incandescent Y IMH.truck
Incandescent N IH.truck
LED Y LMH.truck
LED N LH.truck
Upgraded LED Y LMUH.truck
Upgraded LED N LUH.truck
Shorty Incandescent Y IMS.truck
Incandescent N IS.truck
LED Y LMS.truck
LED N LS.truck
Upgraded LED Y LMUS.truck
Upgraded LED N LUS.truck
Activity Incandescent Y IMA.truck
Incandescent N IA.truck
Activity 4x4 Incandescent Y IM4.truck
Incandescent N I4.truck

Texture key:
  • Body- C2busbody.png*
  • Seats- C2seat.png
  • Top of hood- C2hood.png*
  • Window pillars- C2windowborder.png*
  • 8-way light border- C28wayborder.png*
  • Side Lettering- C2SideLettering.png*
  • Bus number- C2busnumber.png*
  • Rub-rails- C2rubrail1.dds/C2rubrail2.dds*
*Any textures specific to the Activity bus have an 'A' at the end of the texture name.
Texture downloads:
PSD Text Templates
RigsPSD Rubrail Template
Yellow Rubrails
White Rubrails (replaces Activity bus rubrails)
Gray Seats
Red Seats
Reactions:michael gondick, glejeune3, Busdriver14 and 2 others

Introduction¶

Rigs of Rods (RoR) is a free/libre soft-body physics simulator mainly targeted at simulating vehicle physics. The soft-body physics system is based on mass-spring-damper theory.

This page will help you learn the basics of Rigs of Rods, from installing to playing multiplayer.

Installation¶

Downloading¶

To get started, download the latest version of the game from our homepage.

If you're running Linux, you can download the game by following these instructions.

Once downloaded, double-click the file to start the installer.

Windows SmartScreen warning¶

When launching the installer for the first time, Windows Defender SmartScreen may prevent the installer from starting.

If this happens, click More info then Run anyway.

The installer should launch once you accept the UAC dialog.

Installing¶

Select your language, then click OK.

Click Next.

Accept the agreement, then click Next.

If you wish to install RoR to another location, you can change it here. We recommend leaving it to the default location.

By default, RoR only comes with a very small selection of content. To help new players, we've created content packs which provide a good selection of vehicles and terrains to get you started.

You can choose to either download all the packs, or only select the ones that interest you. For simplicity's sake, no packs will be downloaded.

Click Next to continue.

If you want the installer to create a desktop icon, check the box. Click Next to continue.

Rigs Of Rods School Bus Pack

Click Install to begin the installation process.

Once the installation finishes, read the message that appears then click Next to continue.

Installation is now completed. Leave Launch Rigs of Rods checked then click Finish to launch RoR!

First Run¶

When launching RoR for the first time, the user directory will be created. On Windows this is located at DocumentsMy GamesRigs of Rods or at ~/.rigsofrods on Linux. This is where configuration files, logs, and mods are stored.

The game should open in a small window:

Before playing, you should first change your settings. Begin by clicking Settings.

First, make sure the rendering system is set to Direct3D9 Rendering Subsystem. If it's set to OpenGL Rendering Subsystem, change it then restart RoR. If Direct3D9 doesn't appear on the list, install the DirectX Runtime and restart your PC.

If you're running Linux, ignore this as DirectX is not available. Download surah yasin.

Now select Video Mode and change it to your monitor's native resolution then restart the game to apply your changes.

Click Settings again, then click the Graphics tab.

The following settings should be fine for most people, but feel free to adjust them to fit your liking.

Then click the Audio tab and set the device and volume.

Once you're finished, restart the game again.

Now you're ready to begin playing. Start by clicking Single player to open the terrain selector.

For the sake of this tutorial, select North St Helens.

Once the terrain loads, you will spawn as a country person known lovingly as RoRBot. You control him with the arrow keys while using SHIFT to run and SPACE to jump (good for getting over bumps, or if you get stuck).

You spawn in front of a building known as the Rig-a-Deal. This is where you will spawn new trucks. Walk into the 'Office' to bring up the selection menu. You can also spawn a vehicle anywhere at any time by pressing CTRL+G.

Use the mouse or arrow keys to move through the menus. Select the DAF Semi truck. The truck spawns inside the Rig-a-Deal with you inside it. If you happen to spawn the truck with RoRBot outside of the vehicle, simply hit ENTER/RETURN to get in a vehicle.

Driving¶

Rigs Of Rods Thomas C2

The DAF semi isn't the most agile or best looking truck in the game, but it serves us a purpose later. The camera inside the Rig-a-Deal is fixed, so you will be unable to move it until you leave. Switch to the in-cab camera by hitting C. Use the UP arrow key to accelerate out of the Rig-a-Deal (Rigs of Rods uses a simulated clutch which begins to engages at a specific point. This why the semi doesn't move until 1000 RPM). Use DOWN to brake, and LEFT/RIGHT arrows to steer. Use PGUP/PGDOWN to select your transmission direction/speed.

Start by exploring Coldwater, the town you begin in. It isn't very big but provides some decent moving room. If you get stuck, or wreck, hit I to reset back to the Rig-a-Deal, or BACKSPACE to reset the truck in its current position.

If you hold BACKSPACE for one second, you will enable the 'advanced repair mode' which lets you move the vehicle to any position by using the WASD keys to move and the arrow keys to rotate. Press BACKSPACE again to exit.

You can switch transmission modes by hitting Q. There are 5 transmission modes available: * Automatic shift * The gear change is fully automatic, the player only has to set the gear by pressing PGUP/PGDOWN. * Manual shift: Auto clutch * The gear is changed on user request. No clutch should be pressed to change gear, vehicle takes care of that. Just use A and Z to shift. * Fully manual: sequential shift * The user must press clutch and select whether it is needed to switch up or down. Depress the clutch by hitting LEFT SHIFT, then press A to upshift or Z to downshift. * Fully manual: stick shift * This mode is useful if you have a game controller with an H-shifter (like Logitech G27). In this mode the player can set gears 1-6, N, and R directly by the stick. * Fully manual: stick shift with ranges * This mode is mostly used in vehicles having more gears than 6. In this case you can select from 3 ranges: low (gear 1-6), medium (gear 7-12), high (gear 13-18) by pressing the appropriate button. Like if you want to select the 8th gear, you have to select gear N first, press the midrange button, then select the 2nd gear on the h-stick. Remember, range selection can be made only if the gear is in N.

If you stall, there are 2 keys to be remembered: X enables or disables the electricity in the vehicle, and S activates the starter. Press X and you'll see a yellow battery icon lit on the UI. Hold S until the engine is started. Resetting the vehicle with BACKSPACE or I will instantly start the engine.

Remember how to change the camera? Hit C twice. You're now in third-person view and can move the camera around. Use the number pad (specifically 2, 4, 6, and 8) to move the camera. Pressing 5 resets the camera. 9 and 3 zoom in/out respectively and 1 gives you a front view of your truck.

You can also move the camera by holding right-click and dragging with your mouse.

Now, make your way back to the Rig-a-Deal.

Trailer Loads¶

You should see a large, grey, open-platform with an orange console. Park the truck (use P to set the parking brake) and hit ENTER/RETURN to get out. Note that the same camera commands work with RoRBot. Step in front of the orange console to open the load selector.

Select the Semi trailer (37 tons).

Get back in the semi and drive in front of the load. Use the camera in third-person view to help you if you need. Back into the trailer. When you get close, use F1/F2 to lower and raise the trailer legs respectively.

The hook points must be within 10cm to hook, so it may take some practice to get close. When you think you're close, hit L. If you're close enough, the semi will latch to the trailer. Raise the legs by holding F1.

You can now drive around with the trailer. You will notice that the trailer has a large effect on how the semi pulls and handles! This process is the same for most trailers. In some cases you can secure loads to trucks using O.

NOTE: on some computers trailers may increase lag or decrease FPS(frames per second) dramatically!

Flying¶

Now that we've become comfortable with driving. Let's try to fly. Move your mouse to the to top of the screen to bring up the menubar, click Vehicles then Antonov 12 to instantly enter the plane which is sitting on the runway.

Apply the parking brake by pressing P. Turn on the flying lights by pressing M. Start the engines by using your mouse to click the ON buttons in the lower right hand corner (or by pressing CTRL+HOME).

Rigs Of Rods C2 Download

When the engines settle to the appropriate idle speed (somewhere near 750rpm), release the parking brake and throttle the engines to full by holding PGUP. Pressing CTRL+PGUP will instantly set the throttle to max.

If you have a short runway, be sure to use the flaps with 1 and 2 (this is especially helpful in multiplayer). When you reach 75-80 knots, lift up by pressing the DOWN arrow. Steer with the LEFT/RIGHT arrows and control the rudder with Z and X. Raise the landing gear, in this plane, by holding F3.

The An-12 does not stand high speeds (175+ knots) well, and you may find that if you go too fast the wings will break apart!

When it comes to landing, make sure you have room to slow down and take your time. Going straight into the runway is the easiest way to land when you first start off. It may take a few passes to go head-on so don't be afraid to abort a landing and throttle back up to regain altitude. The entire process is easier if you shadows enabled, but is possible without. When you land, hit R to reverse thrust and throttle up to slow down in addition to using B to brake the wheels.

This tutorial does not make use of the autopilot. For more information regarding the use of autopilot, see Aircraft handling.

Boating¶

We must explore beyond Coldwater to get to the marina. Take the main road out of Coldwater, heading southwest toward the Elk Hotel. Take the second left after you leave town. You should see the water soon. When you arrive at the marina, you should see marina-style boat docks and a ramp along with a building.

Walk around to the front of the building and enter the open door. Choose the Wahoo boat.

Use UP/DOWN to throttle and LEFT/RIGHT to steer. Use PGUP to center the throttle (to neutral) and PGDOWN to center the rudder. It may take you a while to get your sea legs. If you have waves enabled, see how far out you can go before you flip over waves!

Conclusion¶

Now that you have a basic grasp of the basic vehicles in RoR, it is now up to you to create your own scenarios. If you feel bored, try the vast selection of mods available on the Repository.

Rigs Of Rods Bus Mods

Multiplayer¶

If you feel like sharing the experience, you can play on one of the many public multiplayer servers. To get started, click the Multi player button on the main menu.

Set your username by clicking on Settings and changing it in the Player nickname textbox.

You may have to restart the game for the changes to take effect.

Now just select the server you want to play on, then click Join.

Rigs Of Rods Thomas C2 Mods Download

The 'any' servers allow you to select a terrain, while other servers (such as Official Nhelens) are set to use a specific terrain.

While on a server, you can enable collisions between other players or hide nicknames by going to Settings in the top menubar.

Note that multiplayer is still in development and can be unstable at times!

Default controls¶

Please see the Controls and configuration page for a full list of controls.

Bluebird All American Mod Rigs Of Rods

Adding content¶

Rigs Of Rods Thomas C2 Download 0.4

To add new vehicles and terrains, go to the Installing content page.