Taylormade Driver Adjustment Instructions


If you don’t know how to adjust Taylormade M6 driver, today I will tell you about this. This driver comes with many exclusive features with increased speed to make your golfing day shiner. One of the exciting features of this driver is you can adjust it as per your preference.

However, if you do not know to adjust it, please don’t worry anymore. In this comprehensive article, you’ll get a clear cut idea about it and you can make adjustments in your favorite M6 driver in a convenient way.

TaylorMade golf designed its R5 dual drivers with pre-installed weight cartridges, already placed for ideal weight distribution. Unlike with the newer R7 and R9 model drivers, the weights in a typical R5 cannot be changed. The TaylorMade M3 Driver allows the player to adjust loft and sole weights, giving its user the freedom to customize the feel and performance to suit their p. The TaylorMade r7 driver has four weights in the heel that are intended to help you straighten out a bad slice or draw. The driver comes with two 2 g and two 10 g weights that are removable with a special tool. Moving these weights to different positions will allow you to make adjustments in your driving accuracy. Adjusting Your Taylormade M3 Driver. There are two ways to adjust the driver face and head- the Loft Sleeve and Y-track. (I provide screenshots from their manual for each and a link to the manual) The Loft-Sleeve allows you to adjust more than loft. With it you can: Increase or decrease loft 0.5 – 7.5 degrees.

Why M6 Driver Is So Special

The M6 driver is one of the exclusive Taylormade golf drivers and you will get many benefits by using it. You’ll be wondered to see that it comes with a twisted face which is a speed injected version. Therefore, you’ll get a great ball speed when you hit it with an M6 driver.

If you are new to golf and never experienced speed so far, this Taylormade M6 driver could be a great opportunity for you to experience the power of speed in golf. On top of that, with this specially designed twist face, you can perform straight and long-short easily.

Besides, if you want to experience higher forgiveness and lower spin, the M6 driver could be one of the best options for you.

Let’s Know How To Adjust Taylormade M6 Driver Perfectly

Adjusting a Taylormade M6 driver is not rocket science at all. But, you have to know the basics to make adjustments in the driver. In this section, I will discuss everything about the Taylormade M6 driver adjustments. SO, without delaying anymore, let’s begin.

Adjusting the Sleeve:

To adjust the sleeve first of all you have to open the screws and remove the clubhead from the shaft. If you want to remove the shaft conveniently, you have to open up the head screw. In this case, you can use the wrench that comes with the golf M6 driver. Just set the wrench on the screw and turn anticlockwise to open it.

Remember, turning clockwise will close the screw. So, as you already know what you have to do, just open the screw and separate the clubhead from the shaft. At this point, you have to adjust the sleeve as per your preference. You’ll see some markings in the shaft. Every mark indicates a specific setting.


Typically, there are four positions where you can adjust the sleeve which is STD, lower, higher, and in the UPRT position. Now, if you adjust the sleeve in the standard position, you’ll get a square face and the loft will be as stated. The lie angle will set at fifty-six degrees.

Java 8 update 45. At this moment, if you change the sleeve to the lower position, the face will be four degrees open and the loft will two degrees lower than stated. Moreover, the lie angle will set at 58 degrees and the RPM will be reduced by 400 RPM.

On the other hand, if you set the sleeve to a higher position, the face will be four-degree closed and the loft will be two degrees higher than stated. Besides, these settings will add 400 RPM to the driver spin while the lie angle will set at 58 degrees.

Besides, if you want to set up the sleeve so that you will get incremental changes, you have to adjust the shaft sleeve to the UPRT position.

Adjusting the Ball Flight Control:

Taylormade M5 Driver Adjustment Instructions

You can also adjust the control of the ball flight. To make adjustments you have to make necessary changes in the weight track system which is easily movable. It comes with a single ten grams weight which will help you to adjust the golf driver to your preferable shot shape. If you position the weight to the center of the track, you will get a neutral position. Uwingmail.

If you position the weight towards the toe, you’ll end up setting it to the max fade position. On the other hand, when it comes to getting the max draw adjustment, simply position the weight toward the heel and you will be all set to go.

Final Words

Whether you want speed or accuracy, a Taylormade M6 driver will make your day even shiner. In this comprehensive article, I tried to help you by providing all necessary information about M6 driver, I believe now you know how to adjust M6 driver conveniently.

How to adjust your TaylorMade Driver Loft Sleeve by Chris Trott

HOW IT WORKS: TaylorMade M6 Driver Video Instruction

You’ve found a great deal online on a TaylorMade SLDR driver online. It’s arrived in pristine condition. Now that you’ve got one of the greatest tools in golf in your hands, it’s time to figure out all the settings.

You could take your club to the driving range and use the guess and check method. But this club has a lot of potential configurations. You’re bound to spend the rest of your life dialing in your club.

Don’t deal with that kind of frustration. Let us help you get to know the TaylorMade SLDR drivers and all their bells and whistles. Arm yourself with these TaylorMade SLDR driver specs and your current driver. Soon you’ll be back on the course hitting longer, straighter balls before you know it.

Setting Up Your SLDR

TaylorMade recommends starting your club adjustment with the loft sleeve. If you already know the loft of your old driver, this is an easy step – just set it to match your current club. Each turn of the dial will change the loft a half degree. Add or remove 250 RPM of spin and adjust the face angle one degree in or out.

Next, hit a few balls and adjust the loft sleeve upward for higher flying shots. Or adjust down to flatten your trajectory. A high loft is typically more desirable, but with the SLDR you get more spin as you increase your loft. Keep turning it up until your balls are starting to pop straight up without getting adequate length down the fairway or driving range. Then adjust your loft setting down just one notch for your optimal loft sleeve position.

Taylormade M4 Driver Adjustment Instructions

Your club’s sole weight position should be your last priority. Start with it in the neutral position, aligned with the blue tick mark. As you dial in your loft settings, you’ll notice if your ball tends to draw (fly to the left) or fade (fly to the right). If you favor one side or the other, the SLDR can be adjusted to compensate. If you tend to fade the ball you should set the weight toward the heel. If you tend to draw set the weight toward the toe of the driver. Move the weight kit slowly across the club. You most likely don’t need maximum draw or fade correction.

Taylormade M2 Driver Adjustments Manual

If you’re still just dreaming of your next adjustable TaylorMade driver, check out our website. We’ve got lots of great deals on new and used TaylorMade drivers. We’ve got the highly adjustable R1 family to the simple, but powerful TaylorMade SLDRs.